10,0 7FL0,5R CB TA H-CARB 10x10x25x75

10,0 7FL 0,5R CB TA H-CARB 10x10x25x75

Sold in packs of 1
SGS

SGS 74402

$142.76 Price:
$74.24

10.00mm Dia, 25.00mm LOC, 10.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 ENDMILL SER 77MCR 7FL 0,5R TA

10,0 7FL 0,5R CB TA H-CARB 10x10x30x80

Sold in packs of 1
SGS

SGS 74414

$143.28 Price:
$74.51

10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 ENDMILL SER 77MCR 7FL 0,5R TA

10,0 7FL 0,5R CB TA H-CARB 10x10x40x100

Sold in packs of 1
SGS

SGS 74426

$162.70 Price:
$84.60

10.00mm Dia, 40.00mm LOC, 10.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 7FL0,5R TA H-CARB 10x10x25x75

10,0 7FL 0,5R TA H-CARB 10x10x25x75

Sold in packs of 1
SGS

SGS 74400

$142.76 Price:
$74.24

10.00mm Dia, 25.00mm LOC, 10.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 7FL0,5R TA H-CARB 10x10x30x80

10,0 7FL 0,5R TA H-CARB 10x10x30x80

Sold in packs of 1
SGS

SGS 74412

$143.28 Price:
$74.51

10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 ENDMILL SER 77MCR 7FL 0,5R TA

10,0 7FL 0,5R TA H-CARB 10x10x40x100

Sold in packs of 1
SGS

SGS 74424

$162.70 Price:
$84.60

10.00mm Dia, 40.00mm LOC, 10.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 7FL1,0R CB TA H-CARB 10x10x25x75

10,0 7FL 1,0R CB TA H-CARB 10x10x25x75

Sold in packs of 1
SGS

SGS 74406

$142.76 Price:
$74.24

10.00mm Dia, 25.00mm LOC, 10.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 7FL1,0R CB TA H-CARB 10x10x30x80

10,0 7FL 1,0R CB TA H-CARB 10x10x30x80

Sold in packs of 1
SGS

SGS 74418

$143.28 Price:
$74.51

10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 7FL1,0R CB TA H-CARB 10x10x40x100

10,0 7FL 1,0R CB TA H-CARB 10x10x40x100

Sold in packs of 1
SGS

SGS 74430

$162.70 Price:
$84.60

10.00mm Dia, 40.00mm LOC, 10.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 7FL1,0R TA H-CARB 10x10x25x75

10,0 7FL 1,0R TA H-CARB 10x10x25x75

Sold in packs of 1
SGS

SGS 74404

$142.76 Price:
$74.24

10.00mm Dia, 25.00mm LOC, 10.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 ENDMILL SER 77MCR 7FL 1,0R TA

10,0 7FL 1,0R TA H-CARB 10x10x30x80

Sold in packs of 1
SGS

SGS 74416

$143.28 Price:
$74.51

10.00mm Dia, 30.00mm LOC, 10.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
10,0 ENDMILL SER 77MCR 7FL 1,0R TA

10,0 7FL 1,0R TA H-CARB 10x10x40x100

Sold in packs of 1
SGS

SGS 74428

$162.70 Price:
$84.60

10.00mm Dia, 40.00mm LOC, 10.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL0,5R CB TA H-CARB 12x12x30x83

12,0 7FL 0,5R CB TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74438

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 0,5R TA

12,0 7FL 0,5R CB TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74450

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL0,5R CB TA H-CARB 12x12x48x100

12,0 7FL 0,5R CB TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74462

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL0,5R TA H-CARB 12x12x30x83

12,0 7FL 0,5R TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74436

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL0,5R TA H-CARB 12x12x36x83

12,0 7FL 0,5R TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74448

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL0,5R TA H-CARB 12x12x48x100

12,0 7FL 0,5R TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74460

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL1,0R CB TA H-CARB 12x12x30x83

12,0 7FL 1,0R CB TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74442

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 1,0R TA

12,0 7FL 1,0R CB TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74454

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL1,0R CB TA H-CARB 12x12x48x100

12,0 7FL 1,0R CB TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74466

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL1,0R TA H-CARB 12x12x30x83

12,0 7FL 1,0R TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74440

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL1,0R TA H-CARB 12x12x36x83

12,0 7FL 1,0R TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74452

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 7FL1,0R TA H-CARB 12x12x48x100

12,0 7FL 1,0R TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74464

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 2,0R TA

12,0 7FL 2,0R CB TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74601

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 2,0R TA

12,0 7FL 2,0R CB TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74609

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 2,0R TA

12,0 7FL 2,0R CB TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74617

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 2,0R TA

12,0 7FL 2,0R TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74600

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 2,0R TA

12,0 7FL 2,0R TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74608

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 2,0R TA

12,0 7FL 2,0R TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74616

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 3,0R TA

12,0 7FL 3,0R CB TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74605

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 3,0R TA

12,0 7FL 3,0R CB TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74613

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 3,0R TA

12,0 7FL 3,0R CB TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74621

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 3,0R TA

12,0 7FL 3,0R TA H-CARB 12x12x30x83

Sold in packs of 1
SGS

SGS 74604

$194.21 Price:
$100.98

12.00mm Dia, 30.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 3,0R TA

12,0 7FL 3,0R TA H-CARB 12x12x36x83

Sold in packs of 1
SGS

SGS 74612

$217.78 Price:
$113.25

12.00mm Dia, 36.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
12,0 ENDMILL SER 77MCR 7FL 3,0R TA

12,0 7FL 3,0R TA H-CARB 12x12x48x100

Sold in packs of 1
SGS

SGS 74620

$241.21 Price:
$125.42

12.00mm Dia, 48.00mm LOC, 12.00mm Shank Dia, 3.00mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL0,5R CB TA H-CARB 16x16x40x92

16,0 7FL 0,5R CB TA H-CARB 16x16x40x92

Sold in packs of 1
SGS

SGS 74474

$323.22 Price:
$168.07

16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL0,5R CB TA H-CARB 16x16x48x100

16,0 7FL 0,5R CB TA H-CARB 16x16x48x100

Sold in packs of 1
SGS

SGS 74486

$366.68 Price:
$190.67

16.00mm Dia, 48.00mm LOC, 16.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL0,5R CB TA H-CARB 16x16x64x115

16,0 7FL 0,5R CB TA H-CARB 16x16x64x115

Sold in packs of 1
SGS

SGS 74498

$413.26 Price:
$214.90

16.00mm Dia, 64.00mm LOC, 16.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL0,5R TA H-CARB 16x16x40x92

16,0 7FL 0,5R TA H-CARB 16x16x40x92

Sold in packs of 1
SGS

SGS 74472

$323.22 Price:
$168.07

16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL0,5R TA H-CARB 16x16x48x100

16,0 7FL 0,5R TA H-CARB 16x16x48x100

Sold in packs of 1
SGS

SGS 74484

$366.68 Price:
$190.67

16.00mm Dia, 48.00mm LOC, 16.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 ENDMILL SER 77MCR 7FL 0,5R TA

16,0 7FL 0,5R TA H-CARB 16x16x64x115

Sold in packs of 1
SGS

SGS 74496

$413.26 Price:
$214.90

16.00mm Dia, 64.00mm LOC, 16.00mm Shank Dia, 0.51mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL1,0R CB TA H-CARB 16x16x40x92

16,0 7FL 1,0R CB TA H-CARB 16x16x40x92

Sold in packs of 1
SGS

SGS 74478

$323.22 Price:
$168.07

16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL1,0R CB TA H-CARB 16x16x48x100

16,0 7FL 1,0R CB TA H-CARB 16x16x48x100

Sold in packs of 1
SGS

SGS 74490

$366.68 Price:
$190.67

16.00mm Dia, 48.00mm LOC, 16.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL1,0R CB TA H-CARB 16x16x64x115

16,0 7FL 1,0R CB TA H-CARB 16x16x64x115

Sold in packs of 1
SGS

SGS 74502

$413.26 Price:
$214.90

16.00mm Dia, 64.00mm LOC, 16.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Chip Breaker Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL1,0R TA H-CARB 16x16x40x92

16,0 7FL 1,0R TA H-CARB 16x16x40x92

Sold in packs of 1
SGS

SGS 74476

$323.22 Price:
$168.07

16.00mm Dia, 40.00mm LOC, 16.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL1,0R TA H-CARB 16x16x48x100

16,0 7FL 1,0R TA H-CARB 16x16x48x100

Sold in packs of 1
SGS

SGS 74488

$366.68 Price:
$190.67

16.00mm Dia, 48.00mm LOC, 16.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO
16,0 7FL1,0R TA H-CARB 16x16x64x115

16,0 7FL 1,0R TA H-CARB 16x16x64x115

Sold in packs of 1
SGS

SGS 74500

$413.26 Price:
$214.90

16.00mm Dia, 64.00mm LOC, 16.00mm Shank Dia, 0.99mm Radius, 7 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 77MC, H-Carb, Corner Radius End Mill
US STOCK SHIPS SAME DAY, USUALLY OUT OF OHIO